Revision history [back]
 | 1 | initial version |
To specify the completion time for gstreamer during the capture of a JPEG image, you can use the "timeout" property of the GStreamer pipeline. Here is an example command-line pipeline that captures a JPEG image and specifies a timeout of 5 seconds:
gst-launch-1.0 v4l2src device=/dev/video0 ! image/jpeg,width=640,height=480,framerate=30/1 ! jpegparse ! timeout seconds=5 ! filesink location=image.jpg
In this pipeline, the "timeout" element is added after the "jpegparse" element and specifies a timeout of 5 seconds. If the pipeline fails to capture an image within 5 seconds, the pipeline will be terminated and an error message will be displayed.
You can adjust the value of the "timeout" property to suit your needs. Make sure to specify the "seconds" parameter with the desired value in seconds.